Home            Engine            Superchargers            Supercharger Kits

Supercharger Kits

There are many supercharger kits available for most cars, here are just a few popular ones.


BMW Supercharger Kit
 
BMW Supercharger Kits ACTIVE AUTOWERKE BMW M3 supercharger kit:

440 HP - Gen 2 Level 1 Now Available with Improved Software and Hardware
Active Autowerke is proud to present the First and ONLY proven working Supercharger System for the BMW E46 M3 worldwide.

This is not your ordinary kit. It is a complete kit backed with countless hours of software refining, precise hardware workmanship and top level engineering. Everything needed to have your BMW M3 perform flawlessly and reliably is included within their kit.
Their standard 5.5psi (Level I) supercharger kit is what we recommend for the enthusiast looking to get more performance out of their beautifully engineered BMW M3. With over 100 kits sold worldwide and over 500 dyno testing runs, this kit has stood the test of time, defied all odds and is living proof of Their DEPENDABLE - STEADFAST - POWERFUL slogan.

BMW E46 M3 Supercharger Kit Components: Level I (5.5psi)

  1. Rotrex C38-71 Trim Supercharger
  2. Active Autowerke Cast Intake Manifold
  3. Front Mounted air to air Intercooler
  4. Active Autowerke By-Pass Valve
  5. Larger Injectors and Spark Plugs
  6. Active Autowerke Mass Air Meter Housing
  7. Supercharger Oil Cooler
  8. 80m Pulley
  9. K&N Air Filter
  10. All mounting Hardware, Plumbing, Hoses and Clamps
  11. Generation 2 AA Custom Software
    *The kit comes complete along with an illustrated directional manual for installation.
    *2 Year Warranty with Free Tech Support
Ford Mustang Supercharger Kit
Ford Mustang Supercharger Kits Each Vortech supercharging system is designed, tested, and sold to be installed on vehicles in their original or otherwise stock form. They are engineered to deliver maximum performance and long-term engine durability at safe boost levels on stock engines. By taking into consideration variables such as the intended use, climate, altitude, and design parameters of stock engines, Vortech supercharging systems deliver proven performance.

Kit Includes

Vortech supercharging systems deliver maximum value for your performance dollar. Most system is 100% complete, right down to the wire ties.

  • Compressor matched, computer aided designed and machined Vortech centrifugal supercharger
  • 3.60” Supercharger Pulley
  • 6 Rib Pulley Retainer Assembly
  • High flow air intake system with a K&N air filter and specially formed polypropylene plastic inlet ducts for minimum restriction and superior fit
  • 255 Walbro Fuel Pump
  • 39lbs Fuel Injectors
  • DiabloSport Predator Hand-held programmer
  • Heat resistant silicone hose coupling
  • Premium grade flex hose
  • Stainless Steel Clamps
  • Carefully designed and flow tested cast aluminum and/or roto molded urethane air Discharge Tubing
  • Compressor By-pass Valve
  • OEM style single cast 356 aluminum Mounting Brackets heat-treated to T-6 specifications for strength
  • Integrated Belt Tensioner
  • Premium Drive Belt Heavy-duty
  • Mounting Hardware
  • Tie Wraps
  • Heavy-duty engine oil lubrication system
  • Step-by-step, fully illustrated Installation Manual
  • 3-year limited warranty on most systems

50 State Emission Legal

Maintenance

Vortech supercharging systems feature a heavy-duty engine oil lubrication system ensuring a fresh supply of oil to the supercharger bearings and gears. This ensures maximum durability with virtually no maintenance. In fact, when you change your engine oil, you change the supercharger oil. Owning a Vortech supercharging system is as easy as following factory maintenance schedules and running premium unleaded fuel.

Pontiac Supercharger Kit
Pontiac Supercharger Kits RADIX Supercharger System:

The supercharger has been spun around 180, to better utilize the stock air path. The genius of this design is it keeps a straight airflow path into the supercharger inlet, which reduces friction and pumping losses. This all-new intercooled supercharger system utilizes the Magnuson MP112 supercharger with internal bypass valve. Power increases are expected to be around 100 HP and 100 ft-lbs of torque at the rear wheels, depending on the presence of aftermarket products and engine condition.
Intercooled systems are complete with all components necessary for installation. Included in the kit is a cast aluminum intake manifold (replacing the factory nylon manifold), intercooler core, coolant circulation pump, heat exchanger and all necessary hardware to complete the entire installation. This system does not require any hood modifications.

Intercooled Systems Includes:

  • Manifold cooler
  • Water circulation pump
  • Heat exchanger
  • Hoses w/clamps
  • Coolant reservoir
  • Electrical relays and wiring
    Patented cast aluminum manifold replaces factory composite nylon intake, new manifold incorporates equal length intake runners and is isolated from radiant engine heat
  • MP112 supercharger with integral bypass valve. Same internal rotating assembly as Mercedes, Jaguar, Ford and BMW for extended service life and quiet operation
  • Internal bypass valve reduces parasitic losses while cruising for increased efficiency and economy
  • Fuel injectors
  • Fuel rails, factory “push lock connectors”
  • Regulator adapter
  • Computer programmer for optimized drivability
  • Standard 3 Year Limited Warranty on the supercharger system
  • C.A.R.B Approved: (C.A.R.B. D-488-5)

Entire system fits under the hood without cutting any body panels and can be installed using common hand tools. System comes complete with all necessary brackets, connectors, hardware and fuel system components including fuel line disconnect tools. Computer programmer communicates with factory ECU for proper calibration of supercharger system. Transmission shift points, line pressures and converter strategies are optimized for use with the increase in torque and horsepower.

Intercooled Radix systems are available in a Stardust Silver powdercoat or polished finish.

Corvette Supercharger Kit
Corvette Supercharger Kit ATI SC ProCharger models are the first and only gear-driven centrifugal superchargers to feature self-lubrication, and contain the industry's most advanced technology. The P-1SC shares many of the design elements which deliver the record-setting durability and performance of ProCharger competition superchargers, and is also quiet and street legal. With their rugged design, these ProChargers are the only self-contained superchargers durable enough to be backed with a 3 year warranty and powerful enough to harness the benefits of intercooling.
Mercedes Supercharger Kit
Mercedes Supercharger Kits High Performance System team members have over 300 years of experience in aerospace, commercial, and automotive manufacturing / engineering. We have the expertise in material selection, manufacturing, casting techniques, and machining methods, coating, plating, and assembly to produce the highest quality cost-effective supercharger available.

High Performance Systems manufactures every component the same high standards as Mercedes Benz. All components are cast from high-grade aluminum alloy or stainless steel and machined with the state of the art tooling use CNC Machining Centers. Our fasteners are made of high-grade materials for an OEM appearance. Components such as hoses, belts, and idler pulleys are manufactured by leading suppliers in the Mercedes field.

High Performance Systems have teamed with the Eaton Corporation and Magnuson Products, to offer a highly technical and efficient supercharger system. The Eaton supercharger is the virtually unanimous choice of all original equipment manufacturers. The Eaton compressor is used on the SLK, C – Class and the Jaguar R series engines. Jerry Magnuson, the exclusive distributor of the Eaton supercharger brings over 35 years of supercharging experience to these ventures. Magnuson’s R&D team combines more than 60 years of system designing experience with state – of – the – art engineering with computer aided design and fabrication CNC Machining technology. This in turn has developed one of the most durable and efficient supercharger systems in the automotive after market world. Our other partners include automotive experts that are recognized for their achievements in the automotive industry. All our components are proudly made in the USA!

 
 
   
 

Engine   Suspension   Interior   Brakes   Exterior   Transmission   Exhausts   Accessories   Wheels   More